Перевод и анализ слов искусственным интеллектом ChatGPT
На этой странице Вы можете получить подробный анализ слова или словосочетания, произведенный с помощью лучшей на сегодняшний день технологии искусственного интеллекта:
- как употребляется слово
- частота употребления
- используется оно чаще в устной или письменной речи
- варианты перевода слова
- примеры употребления (несколько фраз с переводом)
- этимология
frequency-agile filter - перевод на русский
![A low-pass electronic filter realised by an [[RC circuit]]](https://commons.wikimedia.org/wiki/Special:FilePath/1st Order Lowpass Filter RC.svg?width=200 "A low-pass electronic filter realised by an [[RC circuit]]")
математика
частотный фильтр
![The 80A filter, mainly used to correct for the excessive redness of [[tungsten]] lighting, can also be used to oversaturate scenes that already have blue. The photo on the left was shot with a polarizer, while the one on the right was shot with a polarizer and an 80A filter.](https://commons.wikimedia.org/wiki/Special:FilePath/80a comparison.jpg?width=200 "The 80A filter, mainly used to correct for the excessive redness of [[tungsten]] lighting, can also be used to oversaturate scenes that already have blue. The photo on the left was shot with a polarizer, while the one on the right was shot with a polarizer and an 80A filter.")
![The ''LOMO effect'' imitates photos made with a low-cost Russian camera brand, named "LOMO". It is approximated by saturated central colors, blurred periphery, and darkened corners and edges ([[vignetting]]).}} effect.](https://commons.wikimedia.org/wiki/Special:FilePath/Verblühende Sauerkirsche.jpg?width=200 "The ''LOMO effect'' imitates photos made with a low-cost Russian camera brand, named \"LOMO\". It is approximated by saturated central colors, blurred periphery, and darkened corners and edges ([[vignetting]]).}} effect.")
общая лексика
съемочный светофильтр
Определение
Википедия
Electronic filters are a type of signal processing filter in the form of electrical circuits. This article covers those filters consisting of lumped electronic components, as opposed to distributed-element filters. That is, using components and interconnections that, in analysis, can be considered to exist at a single point. These components can be in discrete packages or part of an integrated circuit.
Electronic filters remove unwanted frequency components from the applied signal, enhance wanted ones, or both. They can be:
- passive or active
- analog or digital
- high-pass, low-pass, band-pass, band-stop (band-rejection; notch), or all-pass.
- discrete-time (sampled) or continuous-time
- linear or non-linear
- infinite impulse response (IIR type) or finite impulse response (FIR type)
The most common types of electronic filters are linear filters, regardless of other aspects of their design. See the article on linear filters for details on their design and analysis.
